CNC Machining in Mississauga
VisionForge is a precision CNC machine shop at 1578 Finfar Ct, Unit #2, Mississauga, Ontario L5J 4K1. Phone: (647) 724-7366. Simultaneous 5-axis on a 2025 Matsuura MX-520 and palletized 3-axis on a Fanuc Robodrill α-T14iAL, inside a climate-controlled facility held at 20°C ±1°. In-house tolerance ±0.0001". AS9100D in process. Controlled Goods Program registered. ISO 9001 partner operations for turning, grinding, and CMM inspection.
Where we are in Mississauga
Address: 1578 Finfar Ct, Unit #2, Mississauga, Ontario L5J 4K1.
Phone: (647) 724-7366
We have direct access to the 401, 403, 407, and QEW. Drop-offs and pickups are welcome during business hours. For Mississauga-based buyers, that means drawings and parts can move between your facility and ours the same day.
Drive times to major Mississauga and western-GTA clusters:
- Airport Corporate Centre: ~10 minutes
- Meadowvale Business Park: ~15 minutes
- Heartland Business Community: ~15 minutes
- Downtown Mississauga / Square One: ~15 minutes
- Oakville industrial (Winston Park, Bronte Creek): ~20–25 minutes
- Downtown Toronto: ~30 minutes off-peak
- Pearson International Airport: ~10 minutes
What we run
- 2025 Matsuura MX-520 simultaneous 5-axis machining centre. 20k RPM spindle. 1 micron repeatable accuracy. Palletized for lights-out production.
- Fanuc Robodrill α-T14iAL, 3-axis. Work envelope 700 × 380 × 330 mm. Palletized.
- Climate-controlled facility held at 20°C ±1° — consistent conditions across the day, so thin-wall titanium and Invar 36 work hold ±0.0001" from morning to afternoon.
- In-house vibratory finishing as a machining add-on for deburring, edge break, and pre-coating surface prep.
- Partner operations (ISO 9001) for live-tool turning, precision grinding, and CMM inspection to ±0.0002" — coordinated through VisionForge on one RFQ and one PO.
See the full equipment page for machine-level detail.
Industries we serve in Mississauga
Mississauga is home to a dense cluster of aerospace, defence, medical device, and industrial automation customers — the industries we are built for.
- Aerospace — OEMs and tiered suppliers, with AS9100D in process and FAI/PPAP support.
- Defence — Controlled Goods Program registered. The Designated Official exam has been passed.
- Medical devices — Ti-6Al-4V, 17-4 PH, 316 SS, PEEK, with material traceability on request.
- Optics, photonics, and industrial automation — Invar 36 mounts, kinematic brackets, end-effectors, automation fixtures.
Services
- Simultaneous 5-axis CNC machining on the MX-520
- 3-axis CNC milling on the Robodrill
- Prototype CNC machining with 2–3 day ship on critical parts where scheduling allows
- Low-volume CNC production runs, 10–500 pieces
- Lights-out CNC machining via palletized unattended operation
- Turning, grinding, and CMM inspection through ISO 9001 partner operations
Quality and certifications
- In-house tolerance: ±0.0001"
- Partner CMM inspection: ±0.0002"
- Facility: 20°C ±1°
- AS9100D in process
- Controlled Goods Program registered
- ISO 9001 partner operations
- FAI / PPAP support on request
- Material certifications available, traceable to the mill
See Quality & Certifications for the governing statement.
Get a Quote.
Response within 24 hours on most RFQs. Get a Quote
FAQ
Where exactly is VisionForge located?
1578 Finfar Ct, Unit #2, Mississauga, Ontario L5J 4K1. Phone (647) 724-7366. Direct access to the 401, 403, 407, and QEW, approximately 10 minutes from Pearson International Airport.
Can I drop off drawings or parts in person?
Yes. Drop-offs and pickups are welcome during business hours. For urgent work, please call ahead so we can be ready to receive the drawings or parts at the door.
Do you serve Mississauga customers specifically?
Yes. A significant share of our work is from Mississauga-based OEMs and their contract engineering partners, including aerospace, medical, and industrial automation customers in the Airport Corporate Centre, Meadowvale, and Heartland clusters.
What services do you offer?
Simultaneous 5-axis CNC machining, 3-axis CNC milling, prototype CNC machining, low-volume CNC production, lights-out CNC machining, and coordinated partner operations (turning, grinding, CMM inspection).
What certifications does VisionForge hold?
AS9100D is in process. Controlled Goods Program registered. The Designated Official exam has been passed. Partner operations run under ISO 9001.
What tolerances can you hold?
±0.0001" in-house on the 2025 Matsuura MX-520 and the Fanuc Robodrill α-T14iAL. Final CMM verification to ±0.0002" available through our ISO 9001 partner.