CNC Machining for Toronto
VisionForge machines precision parts for Toronto OEMs and engineering teams from our Mississauga facility — a 30-minute drive from downtown Toronto, 10 minutes from Pearson International Airport. Simultaneous 5-axis on a 2025 Matsuura MX-520 and 3-axis on a Fanuc Robodrill α-T14iAL, inside a climate-controlled facility held at 20°C ±1°. In-house tolerance ±0.0001". AS9100D in process. Controlled Goods Program registered.
Serving Toronto from Mississauga
We are not in Toronto proper — we are in Mississauga, at 1578 Finfar Ct, Unit #2, L5J 4K1. Phone: (647) 724-7366. For Toronto-based buyers, that means:
- ~30-minute drive to downtown Toronto off-peak, 45 minutes during rush hour.
- Daily courier options. Drawings, first-article parts, and production shipments move between Toronto and our facility daily via standard courier.
- Pickup and drop-off welcome. If your engineering team prefers to hand off drawings or pick up first-article parts in person, the shop is off the 401/403 corridor with easy-on, easy-off access.
- Direct access to the 401, 403, 407, QEW, and Pearson International Airport (~10 minutes). For freight-out and freight-in across the GTA, it's a logistics-friendly location.
Toronto customers typically fall into three patterns: aerospace OEMs in the western GTA airport corridor, medical device companies in the University of Toronto and Toronto Hospital cluster, and industrial automation integrators serving North American automotive and general manufacturing.
What we run
- 2025 Matsuura MX-520 simultaneous 5-axis machining centre. 20k RPM spindle. 1 micron repeatable accuracy.
- Fanuc Robodrill α-T14iAL 3-axis machining centre. Work envelope 700 × 380 × 330 mm.
- Climate-controlled facility held at 20°C ±1°.
- In-house vibratory finishing for deburring, edge break, and pre-coating surface prep on machined parts.
- ISO 9001 partner operations for live-tool turning, precision grinding, and CMM inspection to ±0.0002" — coordinated through VisionForge on one RFQ and one PO.
Industries we serve in Toronto
- Aerospace — OEMs and tiered suppliers with AS9100D in process.
- Defence — Controlled Goods Program registered. The Designated Official exam has been passed.
- Medical devices — Ti-6Al-4V, 17-4 PH, 316 SS, PEEK, with material traceability on request.
- Optics, photonics, and industrial automation — Invar 36 mounts, automation end-effectors, fixture and tooling components.
Services
- Simultaneous 5-axis CNC machining on the MX-520
- 3-axis CNC milling on the Robodrill
- Prototype CNC machining — 2–3 day ship on critical parts where scheduling allows
- Low-volume CNC production — 10–500 piece runs
- Lights-out CNC machining on the palletized MX-520
- Turning, grinding, and CMM inspection through ISO 9001 partner operations
Quality and certifications
- In-house tolerance: ±0.0001"
- Partner CMM inspection: ±0.0002"
- Facility: 20°C ±1°
- AS9100D in process
- Controlled Goods Program registered
- ISO 9001 partner operations
- FAI / PPAP support on request
- Material certifications available, traceable to the mill
See Quality & Certifications for the governing statement.
Get a Quote.
Response within 24 hours on most RFQs. Get a Quote
FAQ
Are you actually in Toronto?
No, we are in Mississauga at 1578 Finfar Ct, Unit #2, L5J 4K1 (phone (647) 724-7366) — about a 30-minute drive from downtown Toronto off-peak. We serve Toronto OEMs and engineering teams daily, and offer pickup and drop-off for customers who prefer in-person handoffs.
Can you deliver to Toronto?
Yes. Daily courier options move drawings, first-article parts, and production shipments between Toronto and our Mississauga facility. For larger shipments, we coordinate freight per the PO.
Can Toronto customers pick up parts in person?
Yes. Pickup is welcome during business hours. Call ahead so we can have the parts ready at the door.
What services do you offer for Toronto customers?
Simultaneous 5-axis and 3-axis CNC machining, prototype work with 2–3 day ship on critical parts, low-volume production (10–500 piece runs), lights-out machining, and coordinated partner operations (turning, grinding, CMM inspection).
What certifications does VisionForge hold?
AS9100D is in process. Controlled Goods Program registered. The Designated Official exam has been passed. Partner operations run under ISO 9001.
What tolerances can you hold?
±0.0001" in-house on the 2025 Matsuura MX-520 and the Fanuc Robodrill α-T14iAL. Final CMM verification to ±0.0002" through our ISO 9001 partner.